Gorman-Rupp Pumps PA6A60-4045D 1110032 thru 1115250 - Manual (Page 14)

OM−04402 PA SERIES PUMPS
PAGE B − 8 INSTALLATION
FLOW
DISCHARGE
LINE
SUCTION
LINE
SIGNAL CABLE
(ATTACH TO
SUCTION LINE)
SUBMERSIBLE
TRANSDUCER
(DOWNSTREAM
FROM SUCTION)
SUCTION
STRAINER
Figure B−6. Submersible Transducer AutoStart Pump Installation
Transducer Connections
The submersible transducer sensor cable is facto-
ry-equipped with a female connector which mates
with a male connector on the back of the EPS con-
trol. If removal or replacement of the female con-
nector is required, reconnect the cable to the con-
nector as shown in Figure B−7.
Once the connections are made, simply plug the
female connector into the male connector on the
back of the EPS, and refer to Section C for opera-
tional procedures.