ProTeam ProGuard Front Mount Squeegee - Manual (Page 3)

ProTeam Front Mount Squeegee 3
CARTON CONTENTS
OVERVIEW
• Squeegee Assembly (1)
• Squeegee Pivot Plate (2)
• Oval Hand Knobs (set of 2) (3)
• Hose (4)
• Squeegee Mounting Bracket (5)
• Spring (6)
• Wire Tie (7)
• Pin (8)
• 3/8” Bolt (9)
• 3/8” Lock Nut (10)
• Owner’s Manual (11)
(1)
(2)
(11)
(3)
(9)
(10)
(6)
(7)
(4)
(5)
( )
Figure A
ASSEMBLY
1. Remove the tank from the cart
and turn the cart onto its side for
installation of the front mount
squeegee.
2. Install the squeegee mounting bracket
onto the bottom of the cart using the
two 5/16-18 x 5/8” bolts and two
washers (provided in base). Push the
bracket all the way forward
(Figure B).
Squeegee
Mounting
Bracket
5/16-18 x
5/8" Bolt &
Washer (2)
Figure B