ProTeam ProGuard LI 3 Cordless - Manual (Page 14)

14 ProTeam
Be sure to air dry the filter before
storing or picking up dry debris.
Installation
Refer to “Filter Assembly/Replacement”
Section of this manual.
Allow the filter to dry before reinstalling
and storing the Vacuum.
Cleaning and Disinfecting the
Wet/Dry Vacuum
To keep your Wet/Dry Vacuum looking
its best, clean the outside with a cloth
dampened with warm water and mild
soap (Figure M).
To clean the drum:
1. Dump out debris.
2. Wash drum thoroughly with warm water and mild soap.
3. Wipe out with dry cloth.
Before prolonged storage or as needed (e.g., waste water pick up) the drum should
be disinfected.
To disinfect the drum:
1. Pour 1 gallon of water and 1 teaspoon of chlorine bleach into the drum.
2. Let solution stand for 20 minutes, carefully swishing every few minutes, making
sure to wet all inside surfaces of the drum.
3. Empty drum after 20 minutes. Rinse with water until bleach smell is gone.
Allow drum to dry completely before sealing the motor on the drum.
WARNING - To assure product SAFETY and RELIABILITY, repairs and adjustments
should be performed by Authorized Service Centers, always using ProTeam
replacement parts.
MAINTENANCE
(Continued)
Dampened
Cloth
Vacuum
Assembly
Figure M
!