Ultimate Support HyperMount QR HYM-100 QR - Manual (Page 2)

1. Loosen both knobs
3. Tighten base knob.
5. Loosen small arm knobs and adjust the arms to
desired length.
2. While holding base, move stand into an
upright position.
4. Swing arms around to the front and tighten upper
knob when arms are in the desired angle.
6. Adjust back bumper to desired angle. Angle will
control the amount the screen tilts back.
HyperStation QR Instructions
1.
3.
5.
2.
4.
6.