Unibor Hydrobor HUW150 - Manual (Page 12)

12
WARRANTY REGISTRATION
5. Machines for repair under our guarantee terms must
be returned to:
REPAIR WORKSHOP
PO Box 445
Sheffield, England
S9 5YS
6. If it is necessary to return this machine for repair,
please use the original packaging if possible and
quote the guarantee card number.
7. The warrantor cannot be held responsible for
damage or loss (however caused) to machines in
transit.
8. Please complete the date of purchase prior to
forwarding Guarantee Registration.
9. Retain this portion for evidence of your purchase
which must be submitted in the event of any
guarantee claim.
This machine is guaranteed against any faulty
components or workmanship for a period of 6 calendar
months from the date of purchase provided that:
1. The guarantee card is completed and returned to
the address below within ten days from the date
of purchase.
2. Any defects are, in the opinion of the warrantor,
due to faulty manufacture and are not caused by
misuse, tampering or attempted operation at other
than the voltage specified on the name plate of the
machine.
3. This guarantee does not cover repairs carried out
by unauthorised persons or defects due to fair
wear and tear.
4. We reserve the right to charge labour, packing
and carriage costs incurred in servicing any item
returned.
THIS GUARANTEE DOES NOT INVALIDATE YOUR STATUTORY RIGHTS.
Model No. .................................. Purchased from ..............................
Serial No. .................................. Date of purchase ............................
U
NIVERSAL
D
RILLING
& C
UTTING
E
QUIPMENT
L
TD
.
(USA)
974 North DuPage Ave
Lombard IL. 60148
USA
(UK)
43 Catley Road
Sheffield S9 5JF
United Kingdom.
(Europe)
Dalweg 1 (Pinnepot II)
3233 KK Oostvoorne
The Netherlands
EU DECLARATION OF CONFORMITY
ENGLISH
EC Declaration of Conformity
Certificate No. EC/MT
We hereby certify that the machine described below:-
1. TYPE : Electro Magnetic Drilling Machine
2. MODEL No: .............................................................
3. SERIAL No .............................................................
These power tools have been designed in compliance with:
2006/42/EC, 2004/108/EC, EN 55014-1, EN 55014-2,
EN 55022, EN 61029, EN 61000-3-2 & EN 61000-3-3.
and with the essential Health & Safety requirements.
Signed: ............................................................. E. Kaibuchi (Director)