Imetec PIUMA NEXT SACCO - Manual (Page 23)

EN
15
TROUBLESHOOTING
PROBLEM SOLUTION
The appliance does not
turn on.
• Ensure that the plug is connected to the socket.
• Ensure that the ON/OFF button has been pressed.
The appliance turns off dur-
ing use and does not turn
on again.
• The vacuum cleaner is equipped with a protective
motor thermostat that shuts off the appliance in
the event of overheating! (caused by passageway
obstruction or clogged dust collection system).
• In the event of its activation, press the ON/OFF
button to turn the appliance off and let it cool down
for a few hours.
• Remove any dust or obstructing objects before
restarting the appliance.
The vacuum cleaner does
not suction well.
• Electronic power control set to the minimum:
Increase power to Medium or Max.
• The dust collection system is full: change the dust
bag.
• The dust bag is not fastened properly: ensure that
the dust bag is installed correctly.
• The filter is clogged clean or replace the filter.
The dust bag full indicator
is red.
• The dust collection system is full: change the dust
bag.
• The filter is clogged: clean or replace the filter.
• The dust bag full indicator can turn red also due to
a suction reduction caused by a large obstructing
object. turn the appliance off, unplug it and remove
the object from the vacuum cleaner.
• A crevice tool is being used: reduce suction by
means of the electronic power control.
The dust compartment door
does not close properly.
• A safety device prevents closing the dust bag
compartment if the dust bag is missing. Ensure that
the dust bag is not missing and that it is installed
correctly.
The vacuum cleaner
produces odours the
first few times it is used.
• These odours are harmless and disappear shortly
afterwards. Ventilate the room.
MI000888_IT-EN.indd 15 6/6/12 10:45 AM