Imetec PIUMA NEXT SACCO - Manual (Page 19)

EN
11
• Always use the appliance with a motor protection filter to prevent damaging the
motor and the vacuum cleaner.
• The power cable must always be fully unwound to prevent hazardous
overheating.
SYMBOLS
Warning ON/OFF switch
Prohibited Hard floors
Protection class II Carpets
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (fig. A)
Refer to figure [A] in the illustrative guide to verify your appliance equipment. All the figures
are on the cover pages of these instructions for use:
1.
Handle
2. Manual cable winding system
2A Turning upper cable hook
2B Fixed lower cable hook
3. Fastening screw
4. Power cable with plug
5. Accessories
5A Crevice tool
5B Upholstery tool
5C Parquet brush
6. Combination carpet/floor brush
6A Brush toggle switch
7. Suction inlet
8. Dust bag compartment cover
9. Dust bag compartment lever
10. Dust collection system
10A Dust bag guides
10B Dust bag
10C Safety interlock
10D Motor protection filter
10E Filter guides
11. Electronic power control
12. ON/OFF switch
13. Dust bag full indicator
ASSEMBLY
• Loosen the fastening screws (3) of the handle (1) and remove it.
• Attach the handle (1) to the body of the appliance, taking care to assemble it correctly.
• Insert the fastening screw (3) and tighten it clockwise [Fig. B1].
• Select the combination brush (6) or the attachment (5) suited to the surface to be
cleaned and connect the vacuum attachment (7).
MI000888_IT-EN.indd 11 6/6/12 10:45 AM