Imetec BELLISSIMA FACE FX User Manual
Page 49
GB
45
note
Do not use the appliance while it is charging.
FIrsT TreaTMenT
The skin must be clean, dry and free from powder, gel or cream.
• Remove the handpiece (1) from the charging base (6).
• press the On/Off button (3)
: the green indicator light (A) - appliance
ready for treatment - starts blinking and then becomes steady.
• Place the treatment surface (2) on your skin:
the LED will light up automatically.
• Gently press and move the handpiece (1)
in small circles. The temperature of the
treatment surface (2) will slowly increase.
• Perform the treatment for 5-7 minutes on
every area.
• Turn the appliance off at the end of the
session by pressing the on/off switch (3).
durInG The TreaTMenT
During treatment it is normal to experience and feel:
• Heat – you can feel a moderate heat. This is normal and should disappear
approximately one hour after the session.
• Slight redness – after the treatment you can notice slight skin redness
(mild erythema) over the treated area. This is normal and should fade
within an hour or two.