System connections & setup, Connect to network, Run web interface – Extron Electronics VN-MATRIX QUICK START User Manual
Page 2: Connect a source (encoder), Connect a display (decoder), Configure vn-matrix as an encoder, Configure vn-matrix as a decoder, Local monitor and display messages
System Connections & Setup
Connect to Network
5
Run Web Interface
8
admin
admin
Connect a Source (Encoder)
6
Connect a Display (Decoder)
7
Configure VN-MATRIX as an Encoder
9
12V DC
REG
COM 1
COM 2
IN
OUT
PERIPH
PC
OUT
DVI-I
IN
DVI-I
I
II
6A MAX
ES3401
www.electrosonic.com
DIGITAL
AUDIO
local monitor (optional)
12V DC
REG
COM 1
COM 2
IN
OUT
PERIPH
PC
OUT
DVI-I
IN
DVI-I
I
II
6A MAX
ES3401
www.electrosonic.com
DIGITAL
AUDIO
Configure VN-MATRIX as a Decoder
10
enter
click on a device to setup
click on a device to setup
choose ‘
’ for Unicast RTP or
‘
’ for Unicast TCP streaming
rtp
tcp
Type the Controller IP into
a web browser address bar...
Control computer must be
on the same subnet as
the VN-MATRIX units
Local Monitor and Display Messages
Device is configured as an
but either no source is connected or
is not compatible with VN-MATRIX.
Encoder
Device is configured as a
but either no display source is
currently selected, or the chosen
source Encoder is not streaming.
Decoder
NETWORK
IP Address:
192.168.0.101
IP Address:
192.168.0.102
Reboot each VN-MATRIX
once it is connected to
the network