Extron Electronics VSS 100 User Guide - Manual (Page 3)

YCS Transcoder Operation and Specifications
Indicator and Operation Specifications, cont’d
4 3
Indicator and Operation
5 Power LED — This front panel LED (figure 3) lights to indicate
that the VSS 100 is receiving power.
VSS 100
LOOP-
THRU
CV-INPUT
5
Figure 3 — VSS 100 Power indicator
When the VSS 100 and all other equipment in the system are powered
up, the system is fully operational. If problems are encountered, ensure
that all cables are routed and connected properly. If problems persist,
call the Extron S
3 Sales & Technical Support Hotline.
Specifications
Video
Gain ............................................... Unity
Bandwidth .................................... 6 MHz (-3dB)
Video input
Number/signal type ................... 1 NTSC, PAL SECAM composite video or RGsB
Connectors .................................... 1 BNC female
Minimum/maximum level(s) .... 1 analog — 0.4V to 1.0V p-p with no offset at
unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. 15.6 kHz to 17.75 kHz
Vertical frequency ....................... 50 Hz to 60 Hz
Video output
Number/signal type ................... 1 loop through - composite video or RGsB
Connectors .................................... 1 BNC female
Minimum/maximum levels ...... Analog — 0.4V to 1.0V p-p
Impedance .................................... 75 ohms
Sync
Output type .................................. Composite sync
Connectors .................................... 1 BNC female
VSS 100 Sync Separator • Specification
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ..................................... 0.3V p-p
Output level .................................. 5.0V p-p
Input impedance .......................... 75 ohms
Output impedance ....................... 75 ohms
Polarity .......................................... Negative
General
Power ............................................. 100VAC to 240VAC, 50/60 Hz, 5 watts, external,
auto-switchable; to 12VDC, 1.0 A power supply.
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to
90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to
90%, non-condensing
Rack mount ................................... No
Enclosure type .............................. Plastic
Enclosure dimensions ................. 1.0" H x 2.4" W x 2.3" D
2.5 cm H x 6.1 cm W x 5.8 cm D
Product weight ............................. 0.5 lbs (0.2kg)
Shipping weight .......................... 2 lbs (0.9kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe
Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.
Optional Accessories
• Extron S-video cable, up to 100‘ (in various lengths) 26-316-xx
• Extron BNC-4 Mini HR cable, (in various lengths) 26-210-xx
• Extron Superflex SHR 1 cable (in various lengths) 26-383-xx
• Extron Superflex SHR 4 cable (in various lenghts) 26-368-xx
• Extron Plenum BNC-5 Mini HR cable (in various lengths) 26-378-xx
• Extron S-video male to 2 BNC adapter, female, 8” 26-353-02
• Extron S-video female to 2 BNC, male (in various lengths) 26-353-xx
• Extron BNC male to RCA female adapter 10-264-01