Extron Electronics IN1700 User Manual

Page 10

normal size. Users can adjust the vertical position of the on-screen display by pressing the

¾ &

¿ Buttons, and adjust the horizontal position by pressing the ½ & ¼ Buttons. Press and release
the buttons to adjust the settings slowly, or press and hold them for faster adjustments. Pressing
the ZOOM Button again returns to a normal view of the entire image.

Freeze Button - This works like the digital freeze frame button on a VCR or DVD player. The
IN1700 stores the image into memory and continues to display the same image until the button is
pressed again.

Menu Button - Used to access the menu commands.*

Arrow Buttons (

¾, ¿, ½ & ¼) - Used to select command options, make the necessary

adjustments for all of the menu commands and maneuver around the screen while in zoom mode.

*Note: Pressing the MENU Button during power up will reset the IN1700 to factory default.
The factory default settings are:

Flicker H: 1

Flicker V: A

Overscan: off

Output Standard: NTSC

Freeze: off

Gen SC & H: 128

Zoom: off

Input Term.: 75 Ohms

Baud Rate: 9600

Serial Delimiter: [ ]

Front Panel Enabled

Output Format: RGBHV

MENU COMMANDS

This section offers a description of the menus and their operations. To access any of the menu
commands, press the MENU Button until the desired command appears on the front panel LCD
screen. When applicable, use the ARROW Buttons to make the necessary adjustments / select
the desired operation. Press and release a button to move by one step in either direction. Press
and hold a button to move continuously through the adjustment range. Once you’ve optimized
the setting for the current input, the IN1700 will retain the setting until it is changed.

An illustration of the LED Display Menu System is provided below, followed by a detailed
description of each menu command.

Command Menu

Input Termination

Output Format

Output standard

GEN SC / GEN H

Serial Baud Rate

Serial Delimiter

Input

Termination

Output

Format

Output

Standard

GEN SC
/ GEN H

Serial

Baud Rate

Serial Delimiter

OFF - Hi-Z

Component

NTSC*

2,400

Less & greater < >

ON - 75 Ohms*

S-Video

PAL

4,800

Brackets [ ]*

RGBHV*

9,600*

Braces { }

RGBS

19,200

Parentheses ( )

* Factory Default Setting