Extron Electronics IN3252HR User Guide - Manual (Page 3)

IN3252HR • Introduction
The IN3252HR is an ultrahigh resolution RGBHV video
distribution amplifier (DA) with gain and peaking controls. It
accepts RGBHV, RGBS, RGsB, RsGsBs, component video,
S-video, as well as high resolution monochrome video and
composite video baseband signals, and distributes the signals to
two separately buffered outputs and one passive loop-through.
The DA is powered by an external power supply, which is
included with the unit.
PC
Monitor
Projector
RG BH V D IS TR IB UTIO N A MP LIF IE R
IN 32 52H R
IN PU TS V
H/ S
B
G
R
Figure 1 — Typical connection setup
Features
400 MHz (-3 dB) video bandwidth — Provides outstanding
video performance.
Wide compatibility — Compatible with RGBHV, RGBS, RGsB,
RsGsBs, component, S-video, as well as high resolution
monochrome video and composite video baseband
signals.
2 outputs — Distributes a video signal from a single input to
two outputs.
Local monitor loop-through — Provides a passive loop-
through signal for a local monitor or for cascading to
create a larger DA system.
Gain controls — Individual red, green, and blue gain controls
amplify the signals to compensate for long cable runs.
Peaking controls — Enhances the image by increasing fine
details and clarity.
1