Extron Electronics DVS 406 Audio I_O Card - Manual

User’s Guide
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
© 2002 Extron Electronics. All rights reserved.
70-151-01 Upgrade Kit
68-618-01 Rev. B
Printed in the USA
08 02
DVS 406 Audio I/O Card
4. Insert the card’s installation screws through the audio card’s
four mounting holes and gently tighten them into the
standoffs.
Fig. 4 — Audio I/O card mounted in place
5. Replace the top cover on the DVS 406 scaler, and fasten it
with the screws which were removed in step 3 of the
“Internal access” section.
6. Rack/furniture mount the scaler, and reconnect the AC
power cord.
Part Numbers
Extron Part Part Number
Audio I/O Card Kit 70-151-01