Xoro HTL 2231D - Manual (Page 93)

HTL 2231D 41
Engl
ish
LCD Settings
Picture setting
The picture settings includes option for “Picture
Mode”, “Contrast”, “Brightness”, “Colour”,
“Sharpness”, “Tint”, “Colour Temperature”, “Aspect
Ratio”, “Noise Reduction” and “Screen”.
Picture Mode
With the ◄ or ► buttons you can choose the picture
mode. The live picture changes to the preset settings.
The presets are:
•
Dynamic
• Standard
• Mild
You can define you own settings if you uses the
USER options.
Brightness
With the ◄ or ► buttons you can select the level of brightness. This option is only than active, when
you uses the USER option by the picture mode.
Contrast
With the ◄ or ► buttons you can select the level of contrast. This option is only than active, when
you uses the USER option by the picture mode.
Colour
With the ◄ or ► buttons you can select the level of contrast. This option is only than active, when
you uses the USER option by the picture mode.
Sharpness
With the ◄ or ► buttons you can select the level of sharpness. This option is only than active, when
you uses the USER option by the picture mode.
Tint
With the ◄ or ► buttons you can select the level of hue. This option is only than active, when you
uses the USER option by the picture mode.
Colour Temperature
With the ◄ or ► buttons you can select the level of
colour temperature. The three preset options are:
•
Cool
• Warm
• Medium
You can define you own settings if you uses the USER
options. Than you can get access to the three colours
“Red”, “Green” and “Blue”. Select the level of each
colour by using the ◄ or ► buttons.
Noise Reduction
With the ◄ or ► buttons you can activate or deactivate
the noise reduction. The option ON starts the noise
reduction and OFF deactivate them.