Xoro HTL 2231D - Manual (Page 71)

HTL 2231D 19
Engl
ish
Connection
VGA
You can use the TV set as a PC monitor by using the VGA
interface. Please connect a VGA cable with the VGA input of the
TV set and with the PC.
With this kind of connection only video signals are transmitted. For
listening sound on the TV you should establish also a sound connection. Please connect the white
and red wire of the 2-pin component cable with the AUDIO OUT (source) and the stereo jack with the
“PC AUDIO” plug of the TV set.
Please press the SOURCE button and choose „VGA“ in the popup window. The VGA input is active.
Notes:
1.
Before you connect the TV set with the PC, please change the graphic resolution of the PC
to: 640 x 480, 800 x 600 or 1024 x 768.
2. Please establish the connection and switch to „PC-VGA“ input.
3. For displaying the best results, please uses the native resolution with HDMI connection of the
TV LCD panel:
•
HTL 2231D —> 1920 x 1080 Pixel
Headphone
You can connect a headphone to the TV set. Please uses a headphone with 3.5
mm phone jack and plug them to the headphone port on the left side of the HTL
2231D.
Digital Sound output by Coaxial
You can connect a digital amplifier to the TV set. Please connect a RCA cable to the
SPDIF plug of the TV set and to your digital amplifier. Your amplifier shall decode Dolby
Digital sound.