Xylem Global Access Radio Modem Software User Manual
Page 14
Global Water
800-876-1172
• globalw.com
- 14 -
Sample Continuously: Clicking this button causes the Global Access software to
take and display a real-time reading approximately once per second until stopped by
clicking it again. Each sample will also update the rest of the fields on the logger's
window. These data readings are not stored in the historical record and do not affect
the normal recording of the logger. The initial reading has a sensor warm-up time of
50mS and the sensor is left powered up until this feature is turned off. In this mode
power is continuously applied to the sensors. This may cause the warm-up time to
not be enforced for a scheduled sample if the logger determines that power has
been applied for a period greater than or equal to the warm-up time.
Signal Level: A window opens to display the
received signal strength of the selected radio
modem. This is generally for quick reference
only. A more accurate measurement can be
made using diagnostics software available from
Global Water.
Click the Next Radio button to cycle through all
active radios one at a time. Click Exit to close
the signal level window and go back to the
main screen.
Get History: This button starts the transfer of all the historical data stored in the
logger’s memory to the PC. Oldest data is collected first and Clicking “Stop” halts the
process.
Clear History: This resets the number of recordings in memory to zero. The user is
warned first and must confirm the action before the memory is cleared.
Sync Time: This button causes the data logger’s internal clock to be set to the
system time of the computer it is connected to. The user is warned first and must
confirm the action before the time is set.
Setup: Clicking this button enters the setup screen where the user can change and
program all parameters into the data logger. Details of the Setup menus are not
described here. For more information on this function, see the software help files or
consult the manual supplied with the data logger.