Xylem Global Access Radio Modem Software - Manual (Page 10)

Global Water
800-876-1172
• globalw.com
- 10 -
View Client Logger From List: This is an alternate way
of opening a display window for a client in the current address book.
Delete Client Logger From List: Selecting this function
will bring up the “Select Client” menu shown above.
Clicking on a name produces a warning message.
Acknowledging the prompt will delete the selection from
the current address book.
For All…
These selections apply a particular
operation to all of the radio loggers which
have been enabled from the current address
book. This includes any units with an open
data window or one that has been minimized
to the bottom of the screen. These operations will not be performed on loggers
which are in the client list but which have not been opened at the time the operation
is performed. A warning message will appear before making any critical changes
and a dialog box will appear for all functions (except Update Every Minute) showing
the pass/fail status of the operation on each logger .
Get Sample for All Client Windows: This causes
a single reading to be taken from each logger
and all data windows to updated with the current
sensor readings and clock time.
Update All Client Windows Every Minute: This
puts the software into an auto-polling mode. The
data fields will be automatically updated once per
minute until stopped by the user. This feature will
override the “Disconnect if Idle for 5 Minutes”
mode so observe power consumption strategies
when leaving this mode enable for long
periods of time. While this mode is enabled,
the Sample Continuously button changes
color and function. Click this button or
disconnect the software to stop Auto-Update.