Xylem Oxi 3205 Dissolved oxygen (D.O.) meter - Manual (Page 21)

Oxi 3205 Operation
21 ba75797e01 03/2009
4.3 Sensor-independent settings
4.3.1 Setting in the Configuration menu
To open the Configuration menu, press the
_
> key in the
measured value display. After completing the settings, switch to the
measured value display with .
4.3.2 Automatic Stability control
The function, automatic Stability control (AutoRead) continually checks
the stability of the measurement signal. The stability has a considerable
impact on the reproducibility of measured values.
The measured parameter flashes on the display
z as soon as the measured value is outside the stability range
z if you switch over between the measured parameters with .
Menu item Setting Description
Language Deutsch
English
(further) Select the menu language
Illumination Auto
On
Off Switching the display
illumination on/off
Contrast 0 ... 100 % Changing the display
contrast
Switchoff time 10 min ... 24 h Adjust the switch-off time
Service information Hardware version and
software version of the
meter are displayed.
Reset - Resets the system settings
to the default values.
For details, see section
4.5.2