Global water – Xylem PL200-G WATER PRESSURE DATA LOGGER User Manual

Page 20

Text mode
Original mode

Global Water

800-876-1172

• globalw.com

- 20 -

Alarm Times: Check the box
associated with each alarm to

enable that feature and enter
the desired start or stop time.
The logger will start at the next
occurrence of the Alarm 1 time and stop at the next occurrence of the Alarm 2 time

after the Alarm 1 timer has expired. Either or both alarms can be enabled

Note: Use care when programming the alarm times. If left enabled, changing
and reprogramming any of the setup parameters will restart the alarm timers

and could cause the logger to stop recording and the loss of important data.