Xoro HSD 7570 - Manual (Page 54)

24
Engl
ish
Rechargeable Battery Installation & Use
INSTALLING & REMOVING THE BATTERY PACK
1. Make sure the unit is powered off and unplugged.
2. Attach the battery pack to the outlet of the unit as
illustration 1, and align them with each other till you
hear a click sound as illustration 2.
Removing the Battery Pack
1.
Make sure the unit is powered off and unplugged.
2. Pull the battery pack backward as arrowhead 3 while
sliding the latch as 4 (at the bottom of the unit).
USE AND MAINTENANCE
THIS UNIT IS SUPPLIED WITH HIGHLY-EFFECTIVE RECHARGEABLE
BATTERY (LI-POLYMER). SUCH BATTERY PACK A HIGH STORAGE
CAPACITY AND LOW LEVEL OF DEGRADATION. THE LATTER MEANS
THAT THE BATTERY CAN ALSO BE RECHARGED WHEN ONLY
PARTLY SPENT.
Plug the AC adapter into the battery. Please fully charge the battery
prior to firs
The battery pack can be charged in two ways::
1. Charge the battery directly.
•
Charge the battery while it is connected to the DVD player.
•
To charge the battery pack directly, connect the AC/DC adapter to the DC IN jack on
the left side of the battery pack. Connect the power plug into the outlet . The battery
pack charge indicator will turn red and the battery pack will start to charge. When the
battery pack is fully charged, the battery pack charge indicator will turn green.
2.
To charge the battery pack while it is connected to the DVD player, make sure the
POWER OFF of DVD player. Connect the AC/DC adapter to the DC IN jack on the
left side of the DVD player or battery. Connect the power plug into the outlet. The
provided battery can be recharged for about 300 times. It takes about 7 hours to
recharge the battery, then the red indicator is put out and the green one flashes. A
fully charged battery can power the unit for about 2 hours. Power consumption and
the time depends on the operations of the player such as brightness of the screen,
volume level, etc.
Note:
•
Recharge the battery in time when fully spent in order to maximize its life.
CHARGING THE BATTERY PACK