Xylem FP111, FP211, & FP311 GLOBAL WATER FLOW PROBE Users Manual - Manual (Page 12)

Global Water
800-876-1172 • globalw.com
12
Delete All
From the Delete All menu screen, press SET
to delete all stored data.
The upper display shows the number of
stored data sets and the lower display
reads zero. As a warning, the display is
flashing. Press BACK to abort the Delete
All function and return to the menu screen.
Press SET to delete all data from memory.
Once deleted, the data cannot be recovered.
Set Flow Units
From the Set Units menu display, Press SET
to change the Flow Units.
The lower display shows the current flow
units of either FT/S or M/S. Use the UP
and DOWN arrows to select a new unit.
Press SET to save the new selection and
return to the menu screen. Press BACK
to return to the menu screen without saving.
In the menu screen, the current unit selected
is displayed.