beautypg.com

Xylem AquaBoost CS and VS Pumping Packages User Manual

Page 37

background image

Control keys

The keys located on the front panel of the smart relay are used to configure, program, and
control the application and to monitor the progress of the application.

RS000029

• The shift key is the white key located on the right side of the LCD screen.
• The green Menu/OK key is used for all confirmations: menu, sub-menu, program,

parameter.

• The gray keys, labeled Z1 through Z4, have arrows below them indicating the

directions of navigation.

Navigate through user-adjustable parameters

When the controller is turned on, the Lead Pump Minimum Run Timer screen appears:

RS000030

• Press the left-most gray key, Z1, in order to navigate to other user-adjustable

parameters.

Modify parameters

1. In order to modify the preset value, press and hold the white shift key and press the

right-most navigation key, Z4.
The current preset value will start to blink.

2. Modify the parameter value with the up and down arrow keys.
3. When the desired value is displayed, confirm the changes by pressing the green

Menu/OK button.

Navigate to and from the main screen

• Continuously press the Z1 left arrow key until the main screen appears:

RS000031

Commissioning, Startup, Operation, and Shutdown

AquaBoost CS and VS Pumping Packages Installation, Operation, and Maintenance Manual

35