Acer DV650C - Manual (Page 32)

The OSD (On-Screen Display) Menu 30
Setting Menu
Name Description
Language Sets your preferred language for the OSD menu.
Overscan Turns the HDMI overscan function on or off.
Schedule
• Date and Time: Sets the current date and time.
• Schedule: Sets when to turn on or off the display and which input source
should be used for each schedule.
Notes:
• Set the current time before you set the Schedule.
• When schedule settings overlap, the Every Day setting takes priority over other weekly
settings.
• When schedule settings overlap, scheduled power-on time takes priority over scheduled
power-off time.
• If two schedules have the same settings, the first schedule on the list will take priority.
Display Wall
• H Monitors/V Monitors: Sets the number of displays used in the horizontal/
vertical position.
• H Position/V Position: Sets the horizontal/vertical position of the display
wall matrix.
• Frame Comp.: Adjusts images near the display edges for optimal
demonstration across the display wall.
Power Save
Sets the display to enter the power saving mode when there is no signal
detected.
• Eco: All source can enter the power saving mode, but only a VGA signal
can wake up the display or you have to press the power button to wake up
the display when other source is connected.
• Standard: All source can enter the power saving mode and wake up the
display.
• Off: If no source is detected, the backlight will continue on.
• VGA Only: Only the VGA signal can enter the power saving mode and
wake up the display.
Note: Serial can bring any mode out of the power savings.
Set Monitor
ID Assigns an ID number for the current display when multiple displays are
connected.
Language English
Overscan
Schedule
Display Wall
Power Save ON
Set Monitor ID 1
Image Retention ON
Auto Adjustment ON
Advanced
Setting
:Move :Input :Exit Enter Exit