Acer Aspire 1400 - Manual (Page 78)

Software 68
Retype the password in the Confirm new password field.
3 Press Enter.
After setting the password, the computer sets the chosen Password parameter to
“Set”.
4 If desired, you can opt to enable the Password on boot parameter.
5 When you are done, press F10 to save the changes and exit the BIOS Setup Utility.
Removing a password
Follow these steps:
1 Use the ↑ and ↓ keys to highlight the desired Set Password parameter and press
the Enter key. The Set Password box appears:
2 Type the current password in the Enter Current Password field and press Enter.
3 Press Enter twice without typing anything in the Enter New Password and
Confirm New Password fields.
The computer then sets the chosen Password parameter to “Clear”.
4 When you are done, press F10 to save the changes and exit the BIOS Setup Utility.
Changing a password
Follow these steps:
1 Use the ↑ and ↓ keys to highlight the Set User Password parameter and press the
Enter key. The Set Password box appears:
2 Type the current password in the Enter Current Password field and press Enter.
3 Type a password in the Enter new password field.
Retype the password in the Confirm new password field.
4 Press Enter.
After setting the password, the computer sets the User Password parameter to
“Set”.
Set Password
Enter Current Password
Enter New Password
Confirm New Password
[ ]
[ ]
[ ]
Set Password
Enter Current Password
Enter New Password
Confirm New Password
[ ]
[ ]
[ ]
As1400.book Page 68 Monday, April 15, 2002 4:07 PM