Acer DA222HQL - Manual (Page 9)

9 Setting up your DA222HQL
Using your DA222HQL
Setting up your DA222HQL
Open the stand until it snaps in place. Then, tilt the display panel to an angle of
between 10 and 90 degrees from an upright position. Connect the DC-in jack to your
DA222HQL and plug the AC adapter into any AC outlet.
Warning: Only use the bundled power adapter to power your DA222HQL.
Turning on for the first time
To turn on your DA222HQL, press and hold the power button until the screen turns
on. Wait a moment for your DA222HQL to get ready. You will then be asked some
questions before you can use your DA222HQL.
To start, tap to select your language and country, then tap Start. Follow the rest of
the instructions as they are displayed.