Image – Acer H9500BD User Manual
Page 34
24
En
gl
ish
Note: AcuMotion may not work under some conditions: while 3D function is
on and the the frame rate is not HDMI 1.4a 1080@24P frame packing and
3D HQFS timings.
Note: The setting "High" in Dynamic Black may cause brightness flickers
while playing big brightness dynamic range video contents.
Image
Projection
Front-Desktop
•
The factory default setting.
Front-Ceiling
•
When you select this function, the projector inverts the image for
ceiling-mounted projection.
Rear-Desktop
•
When you select this function, the projector reverses the image so
you can project from behind a translucent screen.
Rear-Ceiling
•
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Aspect Ratio
Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
•
L. Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Keystone
Adjust image distortion caused by tilting projection. (±15 degrees)
H. Position
(Horizontal
position)
•
Press
to move the image left.
•
Press
to move the image right.