Boot sequence, Enable disk-to-disk recovery, Password – Acer TravelMate 5210 User Manual

Page 87

Text mode
Original mode

Eng

lis

Enable disk-to-disk recovery

To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,
then select Main from the categories listed at the top of the screen. Find D2D
Recovery at the bottom of the screen and use the and keys to set this
value to Enabled.

Password

To set a password on boot, activate the BIOS utility, then select Security from
the categories listed at the top of the screen. Find Password on boot: and use
the and keys to enable this feature.

This manual is related to the following products:

TravelMate 5510