Acer H7532BD - Manual (Page 36)

26
En
gl
ish
3D
Power On/Off Volume Select this function to adjust the notification volume when
turning the projector on/off.
Alarm Volume Select this function to adjust the volume of any warning
notifications.
3D Choose "On" to enable DLP 3D function.
• On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards and HQFS format file or DVD with
corresponding SW player.
• Off: Turn off 3D mode.
2D to 3D 2D to 3D
Support most of the 2D contents.
Choose "On" to enable 2D to 3D function supported by DLP 3D
technology. Please use DLP 3D glasses to have correct
performance.
"2D to 3D" is only supported under HDMI mode.
Mode
Choose mode of "Photo", "Movie" and "User" as your prefered
3D setting.
Convergence
Choose convergrence effect of "Inward", "Middle" and
"Outword" as your preferred 3D setting in "User" mode.
Depth
Choose depth effect of "Low", "Middle" and "Strong" as your
prefered 3D setting in "User" mode.
3D Format Adjust the 3D format to display 3D content correctly.
"Frame Packing" is only supported under HDMI mode.
3D L/R Invert If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of
left/right image sequence to get the correct image (for DLP 3D).
3D
3D
2D to 3D
3D Format
3D L/R Invert
Press
Off
Press
Invert
3D Warning Message On
Select Adjust Main Menu
2D to 3D
2D to 3D
Mode
Convergence
Depth
Off
Select Adjust Exit
Photo
Invert
Low
3D Format
Exit Select Confirm
Frame Packing
Side by Side Half
Side by Side Full
Top and Bottom
Frame Sequential
Field Sequential
[Auto]