Entering passwords, Setting passwords – Acer Aspire 9510 User Manual
Page 93
77
Eng
lis
h
Entering passwords
When a password is set, a password prompt appears in the center of the
display screen.
•
When the Supervisor Password is set, a prompt appears when you press
•
Type the Supervisor Password and press
If you enter the password incorrectly, a warning message appears. Try
again and press
•
When the User Password is set and the password on boot parameter is
enabled, a prompt appears at boot-up.
•
Type the User Password and press
enter the password incorrectly, a warning message appears. Try again and
press
Important! You have three chances to enter a password. If you fail
to enter the password correctly after three tries, the system halts.
Press and hold the power button for four seconds to shut down
the computer. Then turn on the computer again, and try again.
Setting passwords
You can set passwords using the BIOS utility.