Acer Ferrari 1000 - Manual (Page 56)

36
English
Using Acer Bluetooth optical
mouse
Your Ferrari 1000 notebook computer comes with a Bluetooth optical mouse
and two AA batteries.
Installation
1 On your computer, enable Bluetooth communication (see "Closed front
view" on page 16) and open "Bluetooth Devices" by double-clicking on the
Bluetooth icon in the tasktray.
2 Turn the Mouse upside down; make sure the power switch is ON. Press and
hold the "Bluetooth connection/pairing" button for three seconds. The
Mouse is now in pairing mode and is ready to connect to your computer.
3 Click the "Add" button from Bluetooth Devices.
4 Check the "My device is set up and ready to be found" box. Then click"
Next".
5 The Acer mouse will be discovered. Click on the Acer mouse icon, and then
click "Next".
6 Select "Don’t use a passkey," click "Next".
7 Wait while the Mouse is installed. This may take several seconds.
8 Your mouse is now connected. Move your Mouse to verify the connection.
Usage
Use the Bluetooth mouse as you would a traditional mouse. For optimal
performance, use a mouse pad. Using the Bluetooth mouse on a transparent or
reflective surface will inhibit the ability of the optical sensor to track the cursor.