Re-install bundled software without cd, Change password – Acer TravelMate 4050 User Manual
Page 56
2 Customizing my computer
48
English
Re-install bundled software without CD
Acer eRecovery stores pre-loaded software internally for easy driver
and application re-installation.
1
Boot to Windows XP.
2
Press
3
Enter the password to proceed. The default password is six 0s.
4
In the Acer eRecovery window, select “Recovery actions” and click
“Next”.
5
In the Recovery settings window, select “Reinstall applications/
drivers” and click “Next”.
6
Select the desired driver/application and follow the instructions on
screen to re-install.
At first launch, Acer eRecovery prepares all the needed software and
may take few seconds to bring up the software content window.
Change password
Acer eRecovery is protected by a password that can be changed by the
user. The password is used by both Acer eRecovery and Acer disc-to-
disc Recovery. Follow the steps below to change the password in Acer
eRecovery.
1
Boot to Windows XP.
2
Press
3
Enter the password to proceed. The default password is six 0s.
4
In the Acer eRecovery window, select “Recovery settings” and click
“Next”.
5
In the Recovery settings window, select “Password: Change Acer
eRecovery password” and click “Next”.
6
Follow the instructions on screen to complete the process.
Note: If the system crashes, and will not boot to Windows, users
can run Acer Disc-to-Disc to restore the factory default image
under DOS mode.