Acer P1341W User Manual
Page 33
23
English
Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
•
Press
to select timeout duration.
•
The range is from 10 to 990 minutes.
•
When time is up, the projector will request you to enter
the password again.
•
The factory default setting of "Timeout (Min.)" is "Off".
•
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.
User Password
•
Press
to set up or change "User Password".
•
Use the numerical keys on the remote control to set the
password and press "MENU" to confirm.
•
To delete the digits, Press
.
•
Enter the password again when you see "Confirm
Password" displayed.
•
The password should be 4~8 digits in length.
•
If you select "Request password only after plugging
power cord", you are requested to input the password
every time the power cord is plugged.
•
If you select "Always request password while projector
turns on", you are requested to input the password every
time the projector is turned on.