C2G 40444 4 x 2 HDMI Matrix Switch - Manual (Page 4)

1
Features:
• Supports up to 1080p
Supports 480i, 480p, 720p, 1080i, 1080p resolutions
• Slim Line Remote Control
Operate the switch from a distance or program commands into your existing remote
control system
• Blue LEDs
Blue LEDs to enhance appearance and match existing equipment in your system
• RS-232 Control Capability
Seamlessly integrate this unit into an existing home automation system
• Infrared Extension Jack
Extend the reach of IR signals for remote control
Connecting the 40444 HDMI 4 X 2 Matrix Switch:
● For Optimal performance, use high-quality high-speed HDMI™ cables.
● The Switch’s input and output jacks are clearly marked making it simple for easy cable
connections
● To connect the switch to your digital equipment perform the following tasks:
1. Power down all components that will be connected to the switch.
2. Connect an HDMI cable from each of the HDMI sources to an input on the Matrix Switch
3. Connect an HDMI cable from an output on the Matrix switch to each display
4. Connect a DB9 cable for RS-232 option (if required)
5. Connect a 3.5mm cable for remote control extender (if required)
6. Power on the matrix switch and all connected equipment
Diagram of connections: