C2G 40972 Multi-Function Converter w_CATV Tuner & PIP - Manual (Page 8)

5
Operating the Multi-Function Converter con’t
(1) MTS
When you are watching a CATV Program, use this button to select the audio output mode.
(Please note: not all the CATV Programs are broadcast in MTS STEREO)
(2) Power
When the power is switched “ON”, the Multi-Function Converter operates in CATV mode.
When the power is switched “OFF” the Multi-Function Converter will pass through PC
video. Please note that if your PC is off, when you press this button to PC mode, there will
be no video on your screen.
(3) MUTE
To MUTE the audio, press this button. To resume audio, press this button or “VOLUME
UP” Please Note: this function only works in “CATV Mode”.
(4) Input Source Selection
There are four possible sources for the Multi-Function Converter. You can press this
button to select between Composite Video Base-Band Signal (CVBS), S-Video, CATV and
PC. The selection mode is repeated.
CATVÆ CVBS (A/V) Æ S-Video Æ PC
Press
“MTS” Press
“MTS”
Press “Power”
Press
“Mute”
Press
“Input” Press
“Input” Press
“Input”