C2G 40381 Converter - Manual (Page 5)

(Please refer to Figure 2 on page 3)
tep Turn your isconnect
: Disconnect the Monitor Cable from your computer VGA port.
: Connect the Scan Converter to PC VGA port:
Plug one end of the supplied to the Scan Converter box
other end to the PC's VGA port.
: Connect the Scan Converter to PC Monitor:
Plug one end of PC's Monitor Cable to the Scan Converter box
: Connect one end of supplied
other end to an electrical outlet
ate: avoid damaging your Scan Converter, use only the supplied Power Adapter.
(Please refer to Figure 3 as below)
S-Video provides a higher video than Composite Video and should be used if your TV has a
S-Video Input.
Cable" lo the
Video ( A N ) Gable
ote: The converted Computer will transfer
Port" by using the S-Video Cable or Composite
to through "S-Video Output
Cable.