C2G 39973 TruLink VGA Matrix Switch w_Audio - Manual (Page 6)

3
Steps
1. If you would like to control Monitor 1, press the Monitor 1 button, and when you press it, you
will hear a beep sound.
2. Press either the PC 1 button if you would like your first PC to show up on Monitor 1 or PC 2 if
you want your second PC to show on Monitor 1. After you press either PC 1 or PC 2, you will
hear another beep.
3. Repeat steps 1 and 2 to control the Monitor 2 display.
Operating the VGA Matrix Switch from the front panel
Steps
1. If you would like to switch PCs for your Monitor 1, hit the “1” button until your desired PC is
shown on the display.
2. Repeat this step to control your Monitor 2 display.
Monitor 1
and Monitor
2 Buttons PC 1 and
PC 2
Buttons
PC Toggle Buttons PC Status Lights