C2G 29578 WIRELESS USB HOST ADAPTER - Manual (Page 22)

A PPENDIX
C ABLE A SSOCIATION P ROCEDURE
Cable association steps: Examples/Figures shown used with the association of the TruLink Wireless VGA
Device Adapter
1. Make sure that the Wireless USB Manager is running. Check your Windows tray for the Wireless USB
Manager icon (Figure: Wireless USB Manager).
2. Make sure the WIRELESS/WIRED switch is in the WIRELESS position
3. Plug in the power supply for your Wireless USB device adapter (TruLink Wireless VGA Device
Adapter).
4. Connect the USB cable between an available USB port on your computer and your Wireless USB
device adapter.
5. Complete cable association by pressing the “Accept Association” button when prompted. (Figure:
Cable Association)
6. Remove the USB cable from your Wireless USB device adapter and computer.
Figure: Cable Association
21