AVSL Citronic CEQ231 - Manual (Page 5)

5 170.923UK, 170.926UK User Manual
Specifications
Power supply 115/230Vac 50/60Hz - selectable (IEC)
Frequency response 20Hz - 20kHz
Input impedance : Balanced 40kohms
Input impedance : Unbalanced 20kohms
Output impedance : Bal/Unbal 330ohms
Channel separation >50dB
Signal to noise ratio >102dB
THD 0.01%
Dimensions 44 x 482 x 138mm
Weight 2.0kg
Power supply 115/230Vac 50/60Hz - selectable (IEC)
Frequency response 20Hz - 20kHz
Input impedance : Balanced 40kohms
Troubleshooting
No function and Power switch
LED is not lit
Ensure mains voltage is correct and connected properly
Ensure front panel power switch and mains outlet switch are on
Power is on but no audio
output
Check XLR and/or jack leads are OK and connected properly
Check that GAIN control and sliders are not set to -12dB
Check that inputs and outputs are connected the correct way around
Distorted output
If overall frequency settings are above zero on average, reduce the Gain
Reduce frequency sliders with very high settings to check which is distorting
Output is very low level
If output from mixer is XLR, connect via XLR to equalizer
If input to amplifier is XLR, connect via XLR from equalizer
If output from mixer is jack, connect via jack to equalizer
If input to amplifier is jack, connect via jack from equalizer
Increase Gain control(s) to compensate
Note: for further troubleshooting, refer equipment to qualified service personnel for testing
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2013. AVSL Group Ltd.