AVSL 154.015 VL-65 - Manual (Page 3)

151.604UK User Manual
Rear panel
Mode settings
To set operating mode, press MODE - then UP/DOWN through options – then ENTER to select
an option.
After settings have been made, press and hold MODE for 2 seconds to quit the menu.
Display Mode Setting
 DMX address  to 

 DMX channel mode  ,  ,  ,  ,  ,  (see appendix)
 Slave mode  /  (master, slave )

 preset show  Combined fade-jump-strobe preset show 
 - static color
    (colour 1-31)
   (dimmer 0-255)
   (strobe 0-255)
 - colour jump
   (speed 0-99)
   (dimmer 0-255)
   (strobe 0-255)
 - colour scroll
   (speed 0-99)
   (dimmer 0-255)
   (strobe 0-255)
 Sound activated  /  (sound on/off)
 Sound sensitivity    (internal microphone sensitivity 0-100%)
 White balance
 :    (red 0-255)
 :    (green 0-255)
 :    (blue 0-255)
 LED display mode  /  (display stays on / goes off after 15sec)
 Invert display  /  (inverted / non-inverted display)
 Test mode Self test
 Temperature    (0-9999°C)
 Fixture usage time    ( (0-9999 hours)
1. Digital display
2. 4 button control panel
3. Internal microphone
4. DMX out XLR
5. DMX in XLR
6. Mains inlet IEC and fuse holder
7. Mains daisy chain IEC output