AVSL 150.448 MW-6 - Manual (Page 5)

150.448UK User Manual
DISPLAY CONTROLS:
LED Display Action
Addr Set DMX Address
Er_L If displayed there is a brake in the DMX Chain.
PAn Reverse Pan on/off
tiLt Reverse tilt on/off
FLAS Sound to light mode
AUTO Auto mode various options
REST Reset function
DMX OPERATION:
DMX
Channel
DMX Value Function
1 000-255 Master Dimmer 0-100%
2 000-255 Red Colour 0-100% Dimming
3 000-255 Green Colour 0-100% Dimming
4 000-255 Blue Colour 0-100% Dimming
5 000-255 White Colour 0-100% Dimming
6 000-255 Strobe Slow to Fast
7 000-255 Pan: 0° to 540°
6 000-255 Tilt: 0° to 270°
150.448UK User Manual
CONNECT WITH POWER SUPPLY – THE GROUND WIRE MUST BE CONNECTED:
Use the plug to connect to the main power supply as follows:
Wire Connection International signal
Brown Live L
Blue Neutral N
Yellow /Cyan Earth
QUICK TROUBLE SHOOTING
If the unit is not functioning properly follow the below guidelines
Check the IEC cable is fitted correctly.
Check the fuse hasn’t blown in both the IEC cable and unit (see below)
Check any DMX cables are connected correctly
Check the DMX address has been set correctly
If the unit still fails to respond then contact your retailer.
REPLACING FUSE
Disconnect from the main power supply first then remove the fuse holder above the
IEC Socket to reveal the fuse. Replace with the correct fuse rating as stated on the
product safety label. Then lock the fuse holder cover back into place.