AVSL 150.448 MW-6 - Manual (Page 4)

150.448UK User Manual
CAUTION! TO PREVENT MORTAL ELECTRICAL RISK AND LONG LIFE OPERATION:
For your safety, please kindly pay attention to all of the warnings listed below:
Always plug in the power plug last and disconnect from the mains, when the
device is not in use or before cleaning.
Do not install and operate the device in rain or extreme heat, moisture or dusty
environments.
This device is for indoor use only and in a dry environment.
Do not switch on immediately but wait until it reaches to room temperature, if
the device has been exposed to drastic temperature fluctuations.
Do not shake the device and avoid brute force when installing or operating.
Do not spread the smoke or bubble of effect machine directly to the device.
Do not use the device during thunderstorms and please disconnect the power.
Do not use solvents or aggressive detergent to clean the device. Use a soft and
clean cloth.
Do not modify the device or the connected power cord without authorization.
Use appropriate safety-rope for safety.
Do not stare to the light.
The symbol determines the minimum distance from lighted objects. The
minimum distance between light-output and the illuminated surface must be
more than 0.5m.
150.448UK User Manual
TECHNICAL SPECIFICATION:
Voltage : 230Vac, 50Hz Power Consumption: 80W
LED Type : 6 x 4-in-1 Quad LED
RGBW Fuse: F3A
Beam Angle: 25° LED Lifespan: 10,000hrs
Pan Range: 0-540° Tilt Range: 0-270°
Dimensions : 178 x 173 x 250mm Weight: 2.8kg
DISPOSAL:
Please disposal of the unserviceable device according to the current statutory
requirement