AVSL 160.457 QTFX2000 - Manual (Page 4)

User Manual – QTFX-2000 160.457UK
4
4. Setup :
1. Unpack the fog machine
2. Unscrew the top cap of the tank and remove to fill with the
recommended smoke fluid or place a standard 5L bottle of fluid into
the dedicated location and screw the top cap on.
3. Ensure the pipe is fed down to the bottom of the bottle so a
consistent flow of fluid is supplied to the machine
4. Connect the wireless remote control
5. Connect the IEC mains plug and power up
6. Heat up time is usually between 4-8 minutes. Please ensure no
button is pressed during the heat up time. When the machine is
ready the LED light on the remote control will illuminate
7. Press the button on the remote control for 5 seconds so the fluid has
a chance to flow through the heater block making it ready to use..
8. After this you will be able to use the smoke machine. It is
recommended to produce smoke with small pauses in between so
that the temperature is maintained and the thermostat doesn’t
switch off.
13