AVSL 154.094 DM-X18 - Manual (Page 8)

FIXTURE OR
SCANNER # FIXTURE OR
SCANNER # DEFAULT DMX STARTING
ADDRESS DEFAULT DMX STARTING
ADDRESS BINARY DIPSWITCH SETTINGS
SWITCH TO THE ON POSITION BINARY DIPSWITCH SETTINGS
SWITCH TO THE ON POSITION
1 13
2 14
3 15
4 16
5 17
6 18
7 19
8 20
9 21
10 22
11 23
12 24
1 193
17 209
33 225
49 241
65 257
81 273
97 289
113 305
129 321
145 337
161 353
177 369
1
1 , 5
1 ,6
1 ,5,6
1 ,7
1 ,5,7
1 ,6,7
1 ,5,6,7
1,8
1 ,6,8
1,5,6,8
1,7,8
1,5,7,8
1,6,7,8
1,5,6,7,8
1,9
1,5,9
1,6,9
1,5,6,9
1,7,9
1,5,7,9
1,6,7,9
1,5,6,7,9
1 ,5,8
3.1.2 FIXTURE ADDRESSING 3.1.2 FIXTURE ADDRESSING
The Controller is programmed to control 16 channels of DMX per fixture, therefore the fixtures you
wish to control with the corresponding SCANNER buttons on the unit, must be spaced 16 channels
apart.
Please refer to your individual fixture s manual for DMX addressing instructions. The table above
refers to a standard 9 dipswitch binary configurable device.
3.1.3 PAN AND TILT CHANNELS 3.1.3
Because not all intelligent lighting fixtures are alike or share the same control attributes,
the Controller allows the user to assign the wheel the correct pan and tilt channel for
every individual fixture
Action : Action :
1) Press and hold PROGRAM & TAPSYNC
different DMX channel. Faders are given
a channel buttons together (1) time to
access the number and are labeled on the
surface of the channel assignment mode.
2) Press a SCANNER button or PAGE SELECT
button that represents the fixture whose
faders you would like to reassign.
Notes : Notes :
All pan/tilt can be reassigned to output on a
different DMX channel.
Press AUTO/DEL buttons to delete
the channel
assignment mode.
USER MANUAL 7/18
DMX 512 CONTROLLER SERIES