AVSL 154.094 DM-X18 - Manual (Page 11)

Action : Action :
2) Press the AUTO DEL button repeatedly until the
AUTO LED turns on.
1) Use BANK UP/DOWN buttons to change Program
banks if necessary.
3) Adjust the PROGRAM speed via the SPEED fader
and the loop rate via the FADE TIME fader.
Notes : Notes :
Deselect Blackout if LED is lit.
3.3.3 RUNNING A PROGRAM 3.3.3 RUNNING A PROGRAM
Action : Action :
2) Use BANK UP/DOWN buttons to change Program
banks if necessary.
1) Press and hold the PROGRAM button until the
LED blinks.
3) Select the desired fixture via the SCANNERS button
button. or PAGE SELECT
Notes : Notes :
Deselect Blackout if LED is lit.
4) Adjust and change fixture attributes using the channel
faders and wheel.
6) Select the desired SCENES button to save.
4) Alternatively you can tap the TAPSYNC DISPLAY
button twice. The time between two taps sets the
time between SCENES (up to 10 minutes).
Also called a Tap-Sync.
3.3.4 CHECK PROGRAM 3.3.4 CHECK PROGRAM
Action : Action :
2) Use the BANK UP/DOWN buttons to select
the PROGRAM bank to review.
1) Press and hold the PROGRAM button until the
LED blinks.
3) Press the SCENES buttons to review each
scene individually.
Notes : Notes :
3.3.5 EDITING A PROGRAM 3.3.5 EDITING A PROGRAM
S cenes will need to be modified manually.
5) Press the MIDI/ADD button to prepare the save.
Action : Action :
2) Use BANK UP/DOWN buttons to select the
PROGRAM bank you will copy.
1) Press and hold the PROGRAM button until the
LED blinks.
3) Press the MIDI/ADD button to prepare the copy.
Notes : Notes :
All 8 scenes in a Program bank will be copied.
4) Use BANK UP/DOWN buttons to select the
destination PROGRAM bank.
3.3.6 COPY A PROGRAM 3.3.6 COPY A PROGRAM
5) Press the MUSIC BANK COPY button to execute
the copy. All LEDs on the controller will blink.
USER MANUAL 10/18
DMX 512 CONTROLLER SERIES