AVSL 154.096 DM-X4 - Manual (Page 4)

154.096UK User Manual
Alternatively, selecting “SOUND” on the Run Mode button will engage sound-activated mode, which makes
colour jumps to a music beat detected by the internal microphone. The sensitivity of the internal
microphone is controlled via the Strobe Speed/Sound Sensitivity slider (10).
For strobe effects, pressing the strobe button will perform a white (RGB mix) flashing sequence with speed
governed by the Strobe Speed/Sound Sensitivity slider (10). Releasing the button reverts lights back to the
previous state.
To switch of all lights, a latching Blackout button (5) sets all DMX channels to zero value, indicated by a
flashing LED.
When not in use for long periods, switch off power and disconnect the adaptor from the mains.
Specifications
Power supply 9-12Vdc, 300mA adaptor (supplied)
Controls R, G, B, W/D, mix, MAC, speed, strobe/sensitivity
Mode(s) RGB, RGBD, RGBW, RGBWD, DRGB, DRGBW
Output DMX (XLRF)
Dimensions 200 x 109 x 55mm
Weight 780g
Troubleshooting
No power
Check mains voltage is correct and outlet is switched on
Check mains adaptor is OK and connected properly
No DMX control
Check DMX leads are OK and connected correctly
Check correct group button is selected (flashing LED)
Check that light fixture is set to the correct DMX start address
DMX control not
working as expected
Check that the correct mode is selected for the type of fixture
Check that light fixture is set to the correct DMX mode
Check that light fixture is set to the correct DMX start address
DISPOSAL:
Please disposal of the unserviceable device according to the current statutory
requirements.
Errors and omissions excepted.
Copyright © 2013. AVSL Goup Ltd