AVSL 151.604 LED DUOFLOWER - Manual (Page 2)

151.604UK User Manual
Introduction
Thank you for choosing the QTX LED DUOFLOWER quad colour dual LED flower light as part of your effect
lighting rig. Please read these instructions in full to gain the best results from this item and avoid damage
through misuse.
Unpacking
Your LED DUOFLOWER should reach you in good condition and be supplied with appropriate mains lead(s)
and mounting bracket. If there are any signs of damage or items missing from the packaging, contact
your dealer immediately.
Warning
To prevent risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the housing, disconnect mains and allow unit to dry out & have checked by
qualified personnel before further use. Avoid any impact or extreme pressure to the housing.
No user serviceable parts inside – Do not open the case – refer all servicing to qualified service personnel.
Safety
 Check for correct voltage and condition of IEC lead before connecting to power outlet
 Ensure DMX leads are good condition with no short connections or damaged plugs
Placement
 Mount the unit to a lighting stand or ceiling using the adjustable bracket included
 If the unit is mounted at height, a drop cable should be attached for safety
 If free-standing, ensure that the unit is sited on a stable, non-slip surface.
 Ensure adequate access to controls and connections
Cleaning
 Use a soft dry or slightly damp to clean the cabinet as required.
 Do not use strong solvents for cleaning the unit
Rear Panel
1. IEC mians inlet & fuse holder 4. DMX output XLR connector
2. Sound activation microphone 5. Digital display
3. DMX input XLR connector 6. Programming buttons