AVSL 151.577 LED DERBY III User Manual

Page 4

151.577UK User Manual

Specifications

Power supply

240Vac 50Hz (IEC)

Power consumption

40W

Operating modes

Auto, Sound activated

LED sources

8 x 3W LED (2 x Red, 2 x green, 2 x blue, 2 x white)

Controls

Power on/off, Mic. Sensitivity, dip switches 1-10

Dimensions

295 x 160 x 275mm (inc. bracket)

Weight

3.85kg

Troubleshooting

No power

Check mains voltage is correct and outlet is switched on
Check IEC lead and mains fuse (if fuse continually blows, refer to your dealer)

No light output

Check rear panel dip switch settings (8 on its own gives no LED output)

No sound activation

Check that dip switch 9 is switched to “on”
Check rotary control for microphone sound sensitivity is not fully down (left)

Light output is dim

Make sure front panel optics are clean and clear of debris

Overheating/cutting
out

Ensure that the unit is not too close to a heat source
Ensure that the cooling vent on the rear panel is clear and not covered

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines

Errors and omissions excepted.