AVSL 151.577 LED DERBY III - Manual (Page 3)

151.577UK User Manual
Setting up
Install the LED DERBY III so that the front panel is facing the area to be lighted.
Experiment with positioning to get the best coverage from the multi-beam array.
Connect mains using an appropriate IEC lead to the mains inlet
Operation
The LED DERBY III operates as a stand-alone unit in either auto or sound-activated modes.
Settings are accessible via the 10 dip switches situated on the rear panel.
Sound activated mode is governed by a rotary sensitivity control on the rear panel.
Turning this control clockwise increases the sensitivity of the rear panel mounted microphone
Rear Panel
DIP Switch settings
DIP switche(s) on Effect
10 Auto colour jump with slow rotation
10 + 5 Auto colour fade + jump with slow rotation
10 + 4 Fast auto colour jump with slow rotation
10 + 2 + 1 Auto colour jump with fast rotation
9 + 10 Sound-activated with slow rotation when no sound detected
1 Number 1 to 10 dip switches
2 Power on/off switch
3 Sound-activation microphone
4 Rotary Mic. Sensitivity control
5 Mains inlet (IEC) & Fuse holder