AVSL 151.602 LED DUOBEAM User Manual

Page 4

151.604UK User Manual

Specifications

Power supply

100-240Vac 50/60Hz (IEC)

Power consumption

30W

Operating modes

Auto, Sound activated, Master/Slave, DMX

DMX operation

DMX512: 13-channel

LED sources

2 x RGBW 10W CREE LED

Connection

DMX in/out (XLR), Mains inlet (IEC)

Dimensions

325 x 159 x 165mm (inc. bracket)

Weight

3.17kg

Troubleshooting

No power

Check mains voltage is correct and outlet is switched on
Check IEC lead and mains fuse (if fuse continually blows, refer to your dealer)

No light output

Check rear panel mode settings (SOU2 with no sound, slave mode, DMX etc.)
Check DMX settings from controller (RGBW outputs for each head)

No sound activation

Check that sound activated mode is selected and not set to slave
Check rotary control for microphone sound sensitivity is not fully down (left)
Disconnect any DMX input if sound activated mode is to be used

Unresponsive to DMX

Check DMX connection and leads
Check that DMX mode is enabled
Check the DMX start address is set correctly

No barrel movement

Check DMX X-axis and Y-axis settings
Check that barrel is not stuck or blocked by foreign object

Overheating/cutting out

Ensure that the unit is not too close to a heat source
Ensure that the cooling vent on the rear panel is clear and not covered

Errors and omissions excepted.