AVSL 160.471 QTFX-F2 - Manual (Page 5)

160.470UK, 160.471UK User Manual
Operation
For QTFX-F1, operation is simply via the power on/off switch to power up the high speed fans
and flame coloured LEDs.
For QTFX-F2, the LEDs are multi-coloured for more dynamic and unusual effects.
The colour and brightness of these LEDs are controllable either stand-alone or via DMX512
with additional access to internal programmes for sequenced colour effects.
Stand alone operation is programmable via the LED display and 4-button control panel.
Stand-alone operation for QTFX-F2
LED Display Action
A001 - A512 Set DMX Address
AUt1 - AUt7 Auto programs
SPEd Speed adjustment
SUnd Sound activated mode
ShUt Shutter/strobe effect
rEd Static colour red level
grn Static colour green level
bLu Static colour blue level
Remote DMX signal can be connected via the XLR connector on the side panel. There is also a
DMX output for cascading the DMX signal onto further units to be controlled.
DMX operation for QTFX-F2
Channel Action
1 Red colour level 0 – 100%
2 Green colour level 0 – 100%
3 Blue colour level 0 – 100%
4 Master dimmer 0 – 100%
5 Strobe – slow to fast
6 Internal programme select
7 Speed of internal programme